Vacuum cleaners are mechanical wonders- they are devices used to clean grime, dirt, and dust from floors, surfaces, upholstery and so on. A standard vacuum cleaner consists of an air pump strong enough to create a partial vacuum. This then sucks the dirt and dust into a dust bag, which is then disposed of or cleaned and restored. Over the years, vacuum cleaners have been available in many form factors. You get large industrial grade cleaners, plug-in domestic vacuum cleaners, and even handheld models that work on batteries.
With a device used so regularly, tendencies of wear and tear, noise, power issues and other defects tend to increase with time. Different surfaces need different care and different solutions. Before you head over to a shop to find the best carpet cleaning products, here are some things you should know about cleaning and cleaning devices.
Dry Foam Carpet Cleaning
One of the best carpet cleaning products that is used as a shampoo to condition your carpet’s surface is called the “dry foam” and is made of 90:10 foam to water mix. Since it is so low in moisture, the drying time is reduced drastically to only about half an hour. The steps involved in dry foam carpet cleaning are as follows:
Step 1: Vacuuming the carpet to remove dirt, dust, and debris.
Step 2: Mixing the dry foam shampoo the right way, according to the instructions given by the manufacturer.
Step 3: Pouring the solution into a dry foam generating machine.
Step 4: Using this machine to dispense the foam and use rotating brushes to ensure a uniform spread. These machines can be hired, or you could outsource the entire cleaning process to an expert service provider. All parts of the carpet should be covered.
Step 5: All you need to do now after half an hour is to use your vacuum cleaner to remove the foam solution which has already absorbed all the dirt.
Once done, your carpet will look good as new.
Carpets and Steam Cleaning
For ages, steam cleaning has been one of the preferred carpet cleaning methods all over the world. It has a number of advantages over dry foam cleaning but comes with its own set of issues. One of the biggest reasons people prefer it to dry foam cleaning is that it uses far fewer chemicals. In an ideal situation, you could get the work done with absolutely no chemicals, but steam cleaners definitely need some detergent to clean fibres. You won’t have to buy costly solutions either- a detergent-water solution is more than enough.
The downside to steam cleaning is the huge wait time. You will usually need to wait at least a full day before your carpet is anywhere near dry. This is why you can’t use it for offices or spaces which are open 24 hours a day. Steam cleaning works perfectly and is a pretty simple method. You can buy or rent the steamer at any shop which sells the best carpet cleaning products or find a local service provider who will bring all the equipment and chemicals necessary to get the job done, and will take the entire work off your shoulders.